Canon imageRUNNER 2545i System Settings Manual page 95

3
4
3
5
NOTE
• If you want to check the details of each certificate, select the desired key pair and
press [Cert. Details]. On the Certificate Details page, pressing [Cert. Verif.] enables
you to check whether the selected certificate is expired or not.
• If you want to check what a key pair on the list is being used for, select the desired key
pair and press [Display Use Loc.].
3-36
Setting the Default Key for SSL Communications
Press [ ] or [ ] until [SSL
Settings] appears ➞ press [SSL
Settings].
Press [Key and Cert.].
Select the key pair you want to
use ➞ press [Set as Def. Key].
IMPORTANT
If the default key cannot be changed,
perform the following:
- Access the E-mail/I-Fax settings and
make sure that the SSL settings for
POP and SMTP are set to 'Off'. (See
"Setting up E-Mail/I-Fax Function," on
p. 3-52.)
- Access the Remote UI On/Off
settings and make sure that the Use
SSL setting is set to 'Off'. (See
"Restricting the Use of Remote UI,"
on p. 6-34.)