System Settings - Canon imageRUNNER 2545i System Settings Manual

System Settings

The System Settings includes important settings that affect the management of
1
machine operations. It is recommended that the administrator set the System
Settings to ensure proper operation of the machine.
To make changes to the System Settings, you should log in to the System
Management Mode by entering the System Management ID and System
Password.
NOTE
• The System Management ID and System Password are both set to '7654321' at
purchase. Change them before using the machine. For help, see "Specifying the
System Manager Settings," on p. 1-4.
• If User ID Management is enabled, you can log in to System Management Mode only
by entering the User ID and password of a user registered as "System Manager." For
help, see "When User ID Management Is Enabled," on p. 1-9.
This guide provides instructions on how to configure the System Settings and how
to set up computers to use the machine on a network.
Chapter 1 explains how to limit access to the System Settings and how to activate
certain functions by registering license keys. It also contains information you should
know before setting up a network.
Chapters 2 and 3 help you to connect the machine to a network and set it up for
your network environment. Also refer to Chapter 5 for information on how to set up
computers in order to use the machine's print and send functions on the network.
Chapter 4 describes the System Settings items that are related to the send
function, such as Memory Lock and Forwarding, and how to set restrictions on the
send function.
Chapter 6 describes how to control access to the machine, both from computers on
the network and from the machine's control panel.
1-2

System Settings