Canon imageRUNNER 2545i System Settings Manual page 141

NOTE
• If you select 'Prefix' for R-Key Settings, you can set a code of up to 20 digits that will
access an outside line. Be sure to enter a pause [P] after the prefix code.
• The default setting is 'PSTN'.
1
4
2
Press [PSTN] or [PBX].
● If your machine is connected to an outside line:
● If your machine is connected through a PBX:
4-6
Specifying Communications Settings
Press (Additional Functions)
➞ [System Settings] ➞
[Communications Settings] ➞
[Fax Settings] ➞ [R-key
Settings].
❑
Press [PSTN] ➞ [OK].
❑
Proceed to step 4.
❑
Press [PBX].
❑
Proceed to step 3.