Data Sending/File Sharing Problems - Canon imageRUNNER 2545i System Settings Manual

The Printer Port Name is not displayed in [Print to the following port].
Cause 1 The machine and the cable are not properly connected.
Remedy Check that the machine is connected to the network using the proper cable, and
then restart the machine. (See Chapter 2, "Before You Start Using the Machine,"
in the User's Guide.)
Cause 2 The computer that is printing is not properly set up.
Remedy Check the following:
• Confirm that the proper printer driver is installed in each computer. For
instructions on installing the printer driver, see the Printer Driver Installation
Guide. (See Chapter 3, "Accompanying CD-ROMs," in the User's Guide.)
• Confirm that the correct printer is set as the output destination for the
computer which is printing, and that the spool is properly set.

Data Sending/File Sharing Problems

You cannot send data to an FTP server.
Cause 1 The FTP server is not set correctly.
Remedy Perform the following to check the server status. (If you are using Windows,
perform these from the MS-DOS prompt.)
• Example using UNIX, where the FTP server has the IP address:
192.168.1.195
U:>ftp 192.168.1.195
Connected to 192.168.37.195.
220 canmfs FTP server (UNIX(r) System V Release 4.0) ready.
User (192.168.37.195:(none)): user_name
331 Password required for user_name.
Password:
230 User user_name logged in.
ftp> cd /export/share
250 CWD command successful.
ftp> bin
200 Type set to I.
ftp> put sample.tif
ftp> bye
221 Goodbye
NOTE
If the above are confirmed and file sharing still does not operate normally, consult the
network administrator for the environment you are using.
*Connect to server
*Enter password
*Move to data destination directory
*Set data transfer type (binary)
*Set transfer file name for verification
*Cut off server connection
*User login
Identifying and Isolating Problems
8
8-7