Canon imageRUNNER 2545i System Settings Manual page 19

4
1
5
6
NOTE
If you make a mistake when entering the ID, press
number.
1-6
Setting System Management Mode
Press [System Manager
Settings].
Press [System Manager] ➞ enter
the System Manager's name ➞
press [OK].
NOTE
You can enter a maximum of 32
characters for the name.
Press [System Manager ID] ➞
enter a number (up to seven
digits) using -
keys).
You cannot store a System Manager ID that
only consists of zeros, such as <0000000>.
If you enter fewer than seven digits, the
machine stores the System Manager ID
with leading zeros.
Example: If <02> or <002> is entered,
<0000002> is stored.
(Clear) ➞ enter the correct
(numeric