Canon imageRUNNER 2545i System Settings Manual page 142

3
Select the type of PBX you are using.
4
Press (Reset) to return to the top screen.
● If you select [Prefix]:
❑
➞
Press [Prefix] [Code].
❑
Enter the prefix code using
keys) ➞ press [OK] ➞ [OK].
(numeric
Be sure to enter a pause after the prefix
code. If you press [Pause] at the end of
the prefix code, <P> is displayed. If you
do not insert a pause, the prefix code is
not registered.
You can enter up to 20 digits for a prefix
code.
Press [Backspace] to delete the number
or character immediately to the left of
the cursor.
You can press (Clear) to clear your
entry.
● If you select [Hooking]:
❑
➞
Press [Hooking] [OK].
The selected mode is set.
Specifying Communications Settings
-
4
4-7