Canon imageRUNNER 2545i System Settings Manual page 203

❑
❑
❑
❑
5
❑
❑
❑
● If you are using Windows XP:
❑
5-24
Setting File Server (File Sharing)
NOTE
Select the [Full Control] box so that you can store data scanned with this
machine on a computer (the file server).
Click [OK] to close the [Permissions for <Folder Name>] dialog box.
If the [Security] tab is displayed in the [<Folder name> Properties], click the
[Security] tab to set the local-level access permission. If not, proceed to step 7.
NOTE
The [Security] tab is not displayed when:
• The drive to which the shared folder is set is formatted in FAT16 or FAT32.
• Simple file sharing is enabled.
Click [Add...] to open the [Select Users or Groups] dialog box.
Type "Everyone".
For Windows 2000
[Check Names] ➞ make sure that the correct object name is typed.
NOTE
If the object name is entered incorrectly, the [Name Not Found] dialog box is
displayed. If this happens, click [Cancel] to check whether or not the computer
name and user name are incorrect.
Click [OK] to close the [Select Users or Groups] dialog box.
In the [Security] sheet, under [Name], select [Everyone]. Select the [Full Control] box
under [Allow].
NOTE
Select the [Full Control] box so that you can store data scanned with this
machine on a computer (the file server).
Select the [Share this folder on the network] and [Allow network users to change my
files] check boxes under [Network sharing and security].
For Windows Server 2003