Canon imageRUNNER 2545i System Settings Manual page 242

5
Specify the IP address (or the IP address range) to be permitted or
rejected.
● If you want to permit or reject a single IPv4 address:
● If you want to permit or reject a range of IPv4 addresses:
IMPORTANT
• You can register up to 10 IPv4 addresses or IPv4 address ranges.
• An IPv4 address of <0.0.0.0> cannot be specified.
• The value of [First Address] for [Multiple Addresses] should be smaller than or equal to
that of [Last Address].
❑
Press [Single Address] ➞ enter the
desired IPv4 address using
(numeric keys) ➞ press [OK].
❑
Press [Multiple Addresses] ➞ press
[First Address] ➞ enter the first IPv4
address in the range using
(numeric keys) ➞ press [Last Address]
➞ enter the last IPv4 address in the
range ➞ press [OK].
Restricting Access from Computers on the Network
-
-
6
6-23