Canon imageRUNNER 2545i System Settings Manual page 117

● If you are using an SMTP server that requires POP before SMTP as the
authentication method:
3
3-58
Setting up E-Mail/I-Fax Function
❑
Press [SMTP Server] ➞ enter the SMTP
server IP address or name ➞ press
[OK].
Enter the SMTP server name if the
SMTP server address is already
registered in the DNS server.
Enter the IP address of the SMTP server
if the SMTP server address is not
registered in the DNS server.
❑
Press [Next].
❑
Press [POP Server] ➞ enter the POP
server IP address or name using the
on-screen keyboard ➞ press [OK].
❑
Press [POP Address] ➞ enter the login
name for access to the POP server ➞
press [OK].
❑
Press [POP Password] ➞ enter the
password for access to the POP server
➞ press [OK].
❑
Press [Back].
❑
Press [Authentication/Encryption].
❑
Press [On] for <POP Authentication
before Send>.
❑
Press [Next].
❑
To specify the settings for SSL
communications, proceed to the next
step. If you do not use SSL
communications, press [OK] to return to
the [E-mail/I-Fax] screen ➞ press [Next]
➞ [OK], and then proceed to step 5.