Setting System Management Mode; Specifying The System Manager Settings - Canon imageRUNNER 2545i System Settings Manual
Hide thumbs
Also See for imageRUNNER 2545i:
- Sending and facsimile manual (321 pages) ,
- Reference manual (264 pages) ,
- Printer manual (148 pages)
Table of Contents
Advertisement
Setting System Management Mode
The System Management mode enables the administrator to restrict access to the
1
System Settings by setting the System Manager ID and System Password.
IMPORTANT
If User ID Management is enabled, only users registered as "System Manager" can
change the System Settings by logging in to the machine with their User ID and
password. In this case, you cannot log in as the System Manager by entering the
System Manager ID and System Password.
Displayed when the machine is in the System Management mode
Specifying the System Manager Settings
Follow the procedure below to set the System Manager ID and System Password.
IMPORTANT
• Attaching the optional Copy Card Reader-F1 and specifying the card IDs to be used
restore the System Manger ID and System Password to their defaults ('7654321').
• You must set both System Manager ID and System Password to manage the
operations of the machine.
• If the Language Switch setting is set to 'On', some characters are restricted and
cannot be entered. To enter all characters, set the Language Switch setting to 'Off'.
(See Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.)
1-4
Setting System Management Mode
Advertisement
Table of Contents
