Canon imageRUNNER 2545i System Settings Manual page 73

2
3
3
4
Select whether or not to use SNTP.
● If you want to perform time synchronization using SNTP:
● If you do not want to perform time synchronization using SNTP:
❑
5
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
3-14
Setting SNTP
Press [Off] ➞ [OK].
Press [TCP/IP Settings].
Press [ ] or [ ] until [SNTP
Settings] appears ➞ press [SNTP
Settings].
❑
Press [On].
❑
Use [-] or [+] to set the interval for
performing time synchronization in
<Polling Interval>.
NOTE
You can also enter values using
(numeric keys).
❑
Press [NTP Server Address] ➞ enter the
NTP server's address ➞ press [OK].
❑
Press [OK].
-