4
3
3-64
Setting up LDAP Server
Specify the LDAP server
information.
❑
Press [Server] ➞ enter a server name ➞
press [OK].
❑
Press [Server Address] ➞ enter the
server's address ➞ press [OK].
NOTE
If <Login Information> is set to 'Use
(security authent.)' for the LDAP server
and Reverse DNS Lookup (a function
that looks up the host name from the
IP address) is not supported, enter a
host name instead of an IP address.
❑
Press [Location to Start Search] ➞ enter
the location to start searching ➞ press
[OK].
Enter the location to start searching
according to the type of LDAP server
you are using, or as described below.
You can leave this field blank.