Communication Environment Settings - Canon imageRUNNER 2545i System Settings Manual

Communication Environment Settings

Specify the SNMP (Simple Network Management Protocol) and dedicated port
settings so that you can configure and browse machine settings from a computer
on the network.
This machine supports SNMPv1, and SNMPv3 with enhanced security and
authentication. You can enable both SNMPv1 and SNMPv3 at the same time,
depending on your needs.
IMPORTANT
• If you are configuring the settings for the first time, use the machine's control panel.
After configuring the settings, you can change them using the Remote UI. For
instructions, see the Remote UI Guide.
• Changes made to SNMP Settings and Enable Dedicated Port become effective when
the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds,
and then turn it ON. For instructions on how to turn the machine ON and OFF, see
Chapter 2, "Before You Start Using the Machine," in the User's Guide.
• If you want to use a Canon printer driver or utility, select 'On' for both [Use SNMP v. 1]
and [Enable Dedicated Port] (for IPv4 only).
• You can restrict the IP addresses and/or MAC addresses of computers on which items
can be set or browsed. If you restrict these addresses, it is not possible to use the
Remote UI to set or browse detailed information from computers other than those
whose IP addresses are allowed, regardless of the SNMP and dedicated port settings.
For details, see "Restricting Access from Computers on the Network," on p. 6-21.
• The settings for SNMPv3 can be specified only on the Remote UI. (See Chapter 4,
"Customizing Settings," in the Remote UI Guide.)
• The settings for SNMPv3 can be specified only when SSL communication is enabled.
See the following information on the SSL communication settings.
- "Managing Key Pairs and Digital Certificates," on p. 3-20
- "Setting the Default Key for SSL Communications," on p. 3-35
- Chapter 2, "Managing Jobs and Machine Data," in the Remote UI Guide
NOTE
For instructions on how to enter characters using the on-screen keyboard, see
Chapter 2, "Basic Operations," in the Reference Guide.

Communication Environment Settings

2
2-5