Using The Inner 2 Way Tray-G1 - Canon imageRUNNER 2545i System Settings Manual

Using the Inner 2 Way Tray-G1

You can specify whether or not to use the Inner 2 Way Tray-G1.
IMPORTANT
• This setting is available only when the optional Inner 2 Way Tray-G1 is attached.
• Changes made to Use Inner 2way Tray become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
• Be sure to designate the output trays to be used for specific job types. For help, see
Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.
NOTE
The default setting is 'Off'.
1
7
2
7-14

Using the Inner 2 Way Tray-G1

Press (Additional Functions)
➞ [System Settings].
Press [ ] or [ ] until [Use Inner
2way Tray] appears ➞ press [Use
Inner 2way Tray].