Canon imageRUNNER 2545i System Settings Manual page 124

NOTE
• If you are using Windows 2000 Server, Windows Server 2003, or Windows Server
2008 with Active Directory:
Add "DC=" to each dot separated series of characters in the Active Directory domain
name, and separate each series of characters by a comma.
Example: If <team1.salesdept.canon.co.jp> is the domain name in Active Directory:
DC=team1, DC=salesdept, DC=canon, DC=co, DC=jp
• If you are using Lotus Notes Domino R5 or later:
Enter the dn (Distinguished Name) of the node on the directory tree, such as
"ou=team1", "ou=salesdept", "o=canon", or "c=jp".
• If the server's LDAP version is 3, you do not have to specify [Location to Start Search].
(If the LDAP version is 3, the machine automatically retrieves settings from the server,
and sets the location to start searching.) If the server's LDAP version is 2, you have to
specify [Location to Start Search].
5
Press [Next].
6
7
Press [Port Number] ➞ enter a
port number using
(numeric keys).
Press [Max. No. of Addresses] ➞
enter the maximum number of
addresses to search using
(numeric keys).
Setting up LDAP Server
3
-
-
3-65