Restricting New Addresses - Canon imageRUNNER 2545i System Settings Manual

NOTE
• If you make a mistake when entering the password, press
correct password.
• If you do not want to use the Address Book password, delete the registered password
by pressing
5
Press

Restricting New Addresses

This mode enables you to restrict the entry of new destinations. When you set
Restrict New Addresses to 'On', the following are restricted:
- Specifying a destination using the numeric keys.
- Changing registered destinations.
- Registering new destinations.
IMPORTANT
• This setting is available only when the Send function (optional for the imageRUNNER
2545/2535/2530/2525/2520) is activated or the optional Super G3 Fax Board-AG1 is
attached to the machine.
• If Restrict New Addresses is set to 'On', all stored settings in the Recall mode are
erased.
NOTE
The default setting is 'Off'.
1
Press
For help, see step 1 in "Setting a Password for the Address Book," on p. 4-35.
2
Press [
press [Restrict the Send Function].
For help, see step 2 in "Setting a Password for the Address Book," on p. 4-35.
(Clear) ➞ [OK].
(Reset) to return to the top screen.
(Additional Functions) ➞ [System Settings].
] until [Restrict the Send Function] appears ➞
] or [
(Clear) ➞ enter the
Restricting the Send Function
4
4-37