Canon imageRUNNER 2545i System Settings Manual page 64

IMPORTANT
If you set [BOOTP] or [DHCP] to 'On' on the IP Address Settings screen, the host
name and domain name you set manually will be overwritten. (See "Setting IPv4
Address," on p. 2-15.)
8
9
IMPORTANT
• The DNS dynamic update function enables the machine to register the IP address,
host name, and domain name of the machine to the DNS server automatically. This
function is available in environments with a dynamic DNS server.
• To use the DNS dynamic update function, enter the IP address of the DNS server, the
host name, and the domain name of this machine.
NOTE
• If you have a DHCP server running Windows 2000 Server that uses the DHCP service
and want to register the machine's DNS record, configure the following settings in the
DHCP server:
- Under the DHCP server, right-click the [Scope] icon ➞ click [Properties]. In the [DNS]
sheet of the displayed dialog box, select [Automatically update DHCP client information
in DNS] ➞ [Update DNS only if DHCP client requests].
• If you have a DHCP server running Windows Server 2003 or Windows Server 2008
that uses the DHCP service and want to register the machine's DNS record, configure
the following settings in the DHCP server:
Press [DNS Dynamic Update
Settings].
Press [On] or [Off] ➞ [OK].
If your environment includes a dynamic
DNS server and you want to automatically
register the IPv4 address, host name, and
domain name set for the machine in the
DNS server using dynamic DNS updating,
press [On].
Otherwise, press [Off].
Setting DNS Server
3
3-5