Registering A Ca Certificate - Canon imageRUNNER 2545i System Settings Manual

- If the key pair is used for IEEE802.1X authentication, register a new key pair
and set it as the default key. (See "Registering a Key and Certificate," on
p. 3-25, and "Selecting the IEEE802.1X Authentication Method," on p. 2-10.)
The key pair reset to 'Off' can be deleted.

Registering a CA Certificate

Apart from the X.509 CA certificates (DER) pre-installed in the machine, you can
install additional CA certificates. If you have installed a CA certificate in the
machine from a web browser (Remote UI), register the certificate as described
below.
1
Press
Settings].
For help, see step 1 in "Generating a Key Pair for SSL Communications," on p. 3-21.
2
Press [TCP/IP Settings] ➞ press [
Settings] appears ➞ press [Certificate Settings].
For help, see steps 2 and 3 in "Generating a Key Pair for SSL Communications," on
p. 3-21.
(Additional Functions) ➞ [System Settings] ➞ [Network
❑
Press [Yes] to erase the selected file.
To quit, press [No].
❑
Restart the machine.
Turn OFF the machine, wait at least 10
seconds, and then turn it ON.
] or [ ] until [Certificate
Managing Key Pairs and Digital Certificates
3
3-29