Canon imageRUNNER 2545i System Settings Manual page 281

3
4
7
IMPORTANT
The setting values (60 to 95%) are a rough indication and do not always correspond to
the actual memory consumption; even if an alert message appears, there may be
enough memory left to be used.
7-22
Displaying an Alert Message When the Available Memory Gets Low
Press [On] or [Off].
[On]: Displays an alert message when
the memory consumption reaches the
level to be specified in the next step.
Press [OK] ➞ go to the next step.
[Off ]: Does not display an alert
message even if the available memory
gets low. Press [OK] to complete the
procedure.
Press [ ] or [ ] to decide the
memory consumption level for
an alert message ➞ press [OK].
Press [ ] to decrease the memory
consumption level (minimum: 60%) or
press [ ] to increase it (maximum:
95%). Each press of [ ] or [ ]
decreases or increases the level in five
percent increments.