Selecting The Ieee802.1X Authentication Method - Canon imageRUNNER 2545i System Settings Manual

■ EAP-TTLS (Tunneled TLS)
EAP-TTLS requires only the RADIUS server to issue a digital certificate. The
server certificate sent from the RADIUS server is verified using the CA certificate
on the client machine. The client machine is required to provide the user name/
login name and password in order to authenticate itself to the server. As an
internal authentication protocol, MS-CHAPv2 or PAP is available for selection.
■ PEAP (Protected EAP)
When PEAP is selected, only the RADIUS server issues a digital certificate. The
server certificate sent from the RADIUS server is verified using the CA certificate
2
on the client machine. The client machine is required to provide the user name/
login name and password in order to be authenticated by the server. With PEAP,
the machine uses MS-CHAPv2 as the internal authentication protocol.

Selecting the IEEE802.1X Authentication Method

Follow the procedure below to enable the IEEE802.1X authentication and select
the EAP method.
NOTE
• Before you select the IEEE802.1X Settings, make sure that the required key pairs and
digital certificates are registered in the machine. (See "Managing Key Pairs and Digital
Certificates," on p. 3-20.)
• If you are going to select EAP-TLS, install and register the key and certificate
beforehand. (See Chapter 2, "Managing Jobs and Machine Data," in the Remote UI
Guide.)
1
2-10
IEEE802.1X Authentication Settings
Press (Additional Functions)
➞ [System Settings] ➞ [Network
Settings].