Download  Print this page

Setting Pasv Mode For Ftp - Canon imageRUNNER 2545i System Settings Manual

Hide thumbs

Advertisement

Setting PASV Mode for FTP

Whether or not to use the PASV mode for FTP depends on the network
environment you are using and the settings of the file server to which you are
sending. Before specifying the PASV mode for FTP, consult your network
administrator.
IMPORTANT
• This setting is available only when the Send function (optional for the imageRUNNER
3
2545/2535/2530/2525/2520) is activated.
• Changes made to Use PASV Mode for FTP become effective when the machine is
restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it
ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, "Before
You Start Using the Machine," in the User's Guide.
NOTE
The default setting is 'Off'.
1
2
3-16
Setting PASV Mode for FTP
Press
(Additional Functions)
➞ [System Settings] ➞ [Network
Settings].
Press [TCP/IP Settings].

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: