Canon imageRUNNER 2545i System Settings Manual page 42

3
Select whether or not to use SNMP.
● If you want to set or browse the machine's settings from a computer:
IMPORTANT
If you want to use SNMPv3, specify the settings on the Remote UI. The settings for
SNMPv3 can be specified only on the Remote UI. (See Chapter 4, "Customizing
Settings," in the Remote UI Guide.)
● If you do not want to set or browse each item of the machine with a utility
that uses SNMP to obtain information:
❑
Press [On] for <Use SNMP v. 1>.
❑
To change the community name, press
[Community Name 1] or [Community
Name 2] ➞ enter the community name
using the on-screen keyboard ➞ press
[OK].
❑
If you want to allow the computers on the
network to access the machine and
modify its settings, press [On] for
[Writable SNMP 1] or [Writable SNMP 2].
❑
If you are using Windows Vista/7 and set
[Standard TCP/IP port] for the printer
driver port, and want to enable the
SNMP port monitoring function to
automatically obtain printer management
information such as information on
application protocols and printer ports,
press [On] for <Get Printer Management
Information from Host>. Otherwise,
press [Off].
❑
Press [OK].
❑
Press [Off] for <Use SNMP v. 1> ➞ [OK].
IMPORTANT
If you do not want to use SNMP, make
sure that the SNMPv3 is also disabled
on the Remote UI.
(See Chapter 4, "Customizing
Settings," in the Remote UI Guide.)
Communication Environment Settings
2
2-7