Canon imageRUNNER 2545i System Settings Manual page 98

2
3
4
5
Press [TCP/IP Settings].
Press [ ] or [ ] until [Port
Number Settings] appears ➞
press [Port Number Settings].
Press the key for the desired
protocol to change the port
number.
Press [ ] or [ ] to display the page
containing the key for the desired protocol.
Press [-] or [+] to enter the port
number ➞ [OK].
You can also enter the number using
- (numeric keys).
Repeat steps 4 and 5 to change the port
number for the other protocols.
Setting Port Numbers
3
3-39