Canon imageRUNNER 2545i System Settings Manual page 192

4
Set a destination address using the machine's control panel.
Sample destination setting:
• Server side settings:
[Host Name]:
[Domain]:
The user's home directory is /home/hsato, and /home/hsato/share is the data
destination.
• The machine's destination settings:
The Protocol drop-down list:FTP
[Host Name]:
[File Path]:
[User]:
[Password]:
IMPORTANT
• To use [Full computer name], which was confirmed in step 4, as the host name for
[Host Name] as shown in the above example, it is necessary to use a DNS server.
(This applies even if the machine and the FTP server are in the same subnet.) If no
DNS server is available, the host name setting should be specified using the IP
address of the FTP server.
• Up to 47 alphanumeric characters can be entered for [Host Name] and 120 characters
for [File Path] on the touch panel display.
• If you switch the language of the touch panel display, [Host Name] and [File Path] may
not be displayed correctly.
NOTE
For instructions on how to specify destination address settings, see Chapter 2,
"Sending Documents," in the Sending and Facsimile Guide.
starfish
organization.company.com
starfish.organization.company.com
Enter one of the following:
share (when using relative path) /home/hsato/share
(when using absolute path)
User name entered in step 2
Password for the above user
Setting File Server (FTP)
5
5-13