Teklogix Scanners Applet; Configuring Triggers - Psion Teklogix 7535 G2 User Manual

D.4.16.2 Configuring Triggers
Viewing The Trigger Configuration
The trigger on the 7535 G2 is configured using the Manage Triggers applet. The Teklogix
Imagers applet provides a shortcut to the Manage Triggers applet.
• In the Advanced tab, tap on the Trigger Control button.
• To view all the triggers and the hardware devices that are configured to use them, tap in
the checkbox next to Show all modules.
Adding, Editing And Removing Triggers
For instruction about adding, editing and removing triggers, refer to "Manage Triggers" on
page 114.
D.5

Teklogix Scanners Applet

The bar code symbologies that are to be read by the imager can be enabled using the Tek-
logix Scanners applet. Tapping on Start>Settings>Control Panel followed by the Teklogix
Scanners icon displays this applet. For a list of bar code symbologies, see Appendix C:
"Bar Code Settings".
Warning: Changes made to the symbology configuration using the Teklogix Scanner
applet are synchronized only with the My Defaults bar code symbology
preset. For details, refer to "Configuring Symbologies in the Teklogix
Imagers Applet" on page D-17.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet

Teklogix Scanners Applet

D-21