Getting To Know The Service Manual; How To Use The Service Manual; Contents Of Manual - Fuji Xerox DocuPrint 2050 Service Manual

Introduction

1. Getting to know the Service Manual

1. Getting to know the Service Manual
This manual is used as the standard service manual for the DocuPrint 2050.
• Publication Comment Sheet
Enter any comments and/or corrections regarding the DocuPrint 2050 service manual into the
Publication Comment Sheet, and send it to FX/CSS/IBS through the OpCo TS or CS
department.

2. How to use the Service Manual

This manual describes the standard procedures for the servicing of the DocuPrint 2050. Refer to
Chapter 1 Service Call Procedure for efficient and effective servicing during maintenance calls.

2.1 Contents of Manual

• Hardware
This manual summarizes all technical information on the DocuPrint 2050.
• Chapters
This manual is divided into ten chapters as described below.
Chapter 1 Service Call Procedure
This chapter describes the general work and servicing procedures for the maintenance of the
DocuPrint 2050.
Chapter 2 Troubleshooting
This chapter describes the troubleshooting procedures other than image quality
troubleshooting of the DocuPrint 2050. It also describes how to use the diagnostics and
some programs.
Chapter 3 Image Quality Troubleshooting
This chapter describes the image quality troubleshooting procedures of DocuPrint 2050.
Chapter 4 Disassembly/Assembly and Adjustment
This chapter describes the disassembly, assembly, adjustment and replacement procedures
for components of the DocuPrint 2050.
Chapter 5 Parts List
This chapter contains spare parts list for DocuPrint 2050.
Chapter 6 General
This chapter contains the following general information on DocuPrint 2050.
6.1
6.2
6.3
6.4
6.5
Chapter 7 Wiring Data
This chapter describes the wiring data of DocuPrint 2050.
7.1
7.2
7.3
Preface-2
Specifications
Tools and Service Consumables
Consumables
Periodic Replacement Parts
Installation Procedure
Connector [P (plug) / J (jack)]
General Wiring Diagram
Wiring Diagram between Parts