Terms And Symbols - Fuji Xerox DocuPrint 2050 Service Manual

Introduction

3. Terms and Symbols

3. Terms and Symbols
Specific terms and symbols used in any particular chapter are described in the Preface for that
section. The terms and symbols described here are used throughout this manual.
• The terms and symbols used at the beginning of a text are defined as follows:
DANGER
WARNING
CAUTION
INSTRUCTION
NOTE
REFERENCE
OBJECTIVE
• REP :
• ADJ :
• PL :
• ASSY :
Safety Critical Components (SCC)
For the safety control of the Safety Critical Components and the components specified, follow the
regulations regarding the Safety Critical Components set by Fuji Xerox Co., Ltd.
Preface-4
Indicates an imminently hazardous situation, such as death or serious
injury if operators do not handle the machine correctly by disregarding
the statement.
Indicates a potentially hazardous situation, such as death or serious
injury if operators do not handle the machine correctly by disregarding
the statement.
Indicates a potentially hazardous situation, such as injury or property
damage if operators do not handle the machine correctly by
disregarding the statement.
Indicates that the printer or its components may be damaged if the instructed
procedure is not strictly observed.
Used to emphasize the procedure, servicing, and regulation.
Used to describe the technical terminology and supplementary explanations.
Used to explain purpose of adjustment.
Indicates the disassembly/assembly procedure for reference.
Indicates the adjustment procedure for reference.
Indicates the parts list for reference.
Means Assembly.