Rep8.5 Spring Btr (Pl8.1.6)/Bearing Btr (Pl8.1.7) - Fuji Xerox DocuPrint 2050 Service Manual

REP8.5 SPRING BTR (PL8.1.6)/BEARING BTR (PL8.1.7)

<Removal>
1) Pull the LEVER FRONT R and LEVER FRONT L toward you and open the COVER ASSY FRONT.
2) Remove the ROLL ASSY BTR. (REP8.3)
3) Loosen the BEARING BTR with a pliers and remove it upward.
4) Remove the SPRING BTR.
<Replacement>
Perform the removal procedures in the reverse order.
NOTE
Chapter 4 Disassembly/Assembly and Adjustment
When attaching the left side SPRING BTR and BEARING BTR, press the terminal
of the HARNESS ASSY HV BTR with the SPRING BTR.
4.2 Disassembly/Assembly
4-61