How To Use Parts List; Notice For Use; Caution For Use Of Parts List - Fuji Xerox DocuPrint 2050 Service Manual

5.1 Preface

5.1.1 How to Use Parts List

◆ Section 5 Parts List containts information on spare parts.
◆ The parts list is used in preparation for ordering replacement parts and entering area codes.
To use the parts list correctly, read the description below carefully.

5.1.2 Notice for Use

◆ Read notes, if any, in the DESCRIPTION column carefully before ordering and replacing
parts.
◆ Area codes are shown on each plate.
The area codes (for toner/Current Value adjustment, etc) that cannot be expressed by
specific parts on a plate are shown on another related plate.

5.1.3 Caution for use of parts list

◆ The figures indicating the illustrations are the item No. in the list and present
correspondencebetween the illustrations and parts.
◆ The notation of PL "X.Y.Z" is composed of the plate (PL), item "X.Y", and parts "Z".
◆ The alphabet characters in the illustrations represent screws and clips as follows: "S": screw,
"E": E-ring, "KL": KL clip, "C": C-ring, and "N": nut.
◆ The mark "(with 2-5)" attached to assembly parts on the illustrations and lists represents that
the items "2, 3, 4, and 5" of that plate are contained.
◆ The mark "[Same PLX.Y.Z]" attached to parts in the illustrations and lists resents that the parts
is the same as the parts of the item "Z" of the plate "X.Y".
◆ "HIGH ASSY" in the list represent the high level assembly parts containing that parts.
◆ Parts with (SCC) indicated before the part name in the DESCRIPTION column are Safety
Critical Components. User must comply with Fuji Xerox's regulations on the handling of such
components.
5 - 1
5.1 Preface
Chapter 5 Parts List