Fip-2.4 Pwba Sensor Error - Fuji Xerox DocuPrint 2050 Service Manual

Chapter 2 Troubleshooting
2.3 Level 2 FIP

FIP-2.4 PWBA SENSOR error

Procedure
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
1 transformation, dirt, or foreign object?
- Major check parts -
PWBA SENSOR (PL4.1.17), CABLE SENSOR
(PL9.1.9), PWBA MCU XFABK(B) (PL9.1.25)
- CABLE SENSOR check -
2
Is the CN101<=>J101 connected normally?
- PWBA MCU XFABK(B) replacement check -
3 Does this error recur after the defective PWBA MCU
XFABK(B) is replaced with a normal one?
2-30
Check
Action
YES
Replace and
reattach the parts.
Replace the
To step 3
CABLE SENSOR
Replace the
Action completed
PWBA SENSOR
NO
To step 2