Fuji Xerox DocuPrint 2050 Service Manual page 229

Chapter 6 General
6.5 Installation Procedure
5. Load the paper with the side to be printed facing
up and with all four corners aligned.
NOTE
• Do not fan paper to separate a ream. It causes static
electricity, which can lead to paper jams.
• Do not load paper exceeding the maximum fill line ( ) or
the maximum capacity allowed.
• Push down the lift plate before loading the paper, if the plate
is lifted up. The paper tray with the plate lifted up cannot be
reinserted into the printer.
• Align the right width guide with the paper width correctly.
If the right width guide is not in place, the paper will not be
properly fed and may cause paper jams.
6. Turn the paper size dial to match the size of the
loaded paper.
7. Close the lid of the paper tray and push the tray
completely into the printer.
Important
• The lid of the tray must be firmly closed. If not, the paper
might become misaligned.
• Do not insert the paper tray from the back side of the printer.
Doing so may damage the tray.
NOTE
• Hold the paper tray with both hands and insert it slowly.
6-22