Rep5.4 Actuator Paper Empty (Pl5.1.18) - Fuji Xerox DocuPrint 2050 Service Manual

REP5.4 ACTUATOR PAPER EMPTY (PL5.1.18)

<Removal>
1) Pull the LEVER FRONT R and LEVER FRONT L toward you and open the COVER ASSY FRONT.
2) Remove the COVER ASSY STACK CL. (REP1.7)
3) Remove the COVER ASSY PWB. (REP9.5)
4) Remove the COVER ASSY TOP CL. (REP1.4)
5) Remove the COVER SIDE LEFT CL. (REP1.1)
6) Remove the COVER ASSY RIGHT CL. (REP1.2)
7) Remove the COVER MIDDLE CL. (REP1.3)
8) Remove the GEAR ASSY. (REP7.1)
9) Remove the CHASSIS ASSY CONTROLLER. (REP9.2)
10) Remove the ROS ASSY. (REP10.1)
11) Remove the FRAME ASSY MAIN. (REP9.8)
12) Remove the BASE CHASSIS ASSY with the LVPS 230 and AZUSA HVPS. (REP9.9)
13) Remove the GUIDE ASSY FRONT. (REP5.2)
14) Remove the FEEDER ASSY. (REP5.3)
15) Release the two hooks of GUIDE PAPER ASSY 250 CST L and remove the GUIDE PAPER ASSY
250 CST L with the ACTUATOR PAPER EMPTY from the FRAME FEEDER.
16) Remove the ACTUATOR PAPER EMPTY from the GUIDE PAPER ASSY 250 CST L.
<Replacement>
Perform the removal procedures in the reverse order.
Chapter 4 Disassembly/Assembly and Adjustment
4.2 Disassembly/Assembly
16)
Notch
AZS447CA
4-41