Preface; Before Work - Fuji Xerox DocuPrint 2050 Service Manual

4.1 Preface

The ten major items setting correspondence between the equipment and parts list prescribe the
removal and replacement procedures of main parts. The adjustment procedures are given in a
separate item.
- REP 1
- REP 2
- REP 3
- REP 4
- REP 5
- REP 6
- REP 7
- REP 8
- REP 9
- REP 10
NOTE
NOTE

4.1.1 Before Work

- Turn the power off and unplug the power cable.
- For work around the FUSER ASSY CL CH, wait until the FUSER ASSY CL CH and its ambient
temperatures go down well.
- Handle parts with great care. An excess force may damage a part and disable its function.
- Since many kinds of screws are used, be careful not to mix them up. A wrong screw may damage
a screw hole or cause any other problem.
- To eliminate static electricity, the worker should wear a wrist strap for grounding whenever
possible.
Chapter 4 Disassembly/Assembly and Adjustment
Cover
Paper Cassette
MSI Assembly
Paper Feeder
Cassette Guide
(Missing)
Drive
Paper Transportation
Frame & Electrical
Xerographics
When handling a spare part with no procedural instructions, check the mounting
status well before removal.
As a rule, options shall be removed. If there is no problem, however, they may be
left mounted.
4.1 Preface
4-3