Table of Contents
Advertisement
Chapter 10 Machine Overview
10.1 Print Process
10.1 Print Process
10.1.1 Outline of Print Process
In this device, the print process consists of the seven basic steps to form a toner image on the drum
surface, transfer the toner image to paper, and fix (fuse) the transferred image to paper.
While the drum surface repeats steps 1 to 5 and 7, paper passes through steps 4 to 6.
<Paper flow>
-- >
<Drum operation flow>
1: Charge 2: Exposure 3: Developing 4: Transfer 5: Peeling 6: Fusing 7: Cleaning
<General outline of print process>
PRESSURE ROLL
Detack Saw
Magnet Roll
10-2
1:
Laser Beam
Paper transport path
HEAT ROLL
FUSER ASSY
BTR
Drum
2:
3:
4:
Cleaning Blade
BCR
DRUM / TONER CARTRIDGE
5:
6:
7:
ROS ASSY
CM Blade
ON1001CA
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
