Fip-1.15 Printing Error - Fuji Xerox DocuPrint 2050 Service Manual

Chapter 2 Troubleshooting
2.3 Level 2 FIP

FIP-1.15 Printing error

Procedure
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
1 transformation, dirt, or foreign object?
- Major check parts -
PWBA MCU XFABK(B) (PL9.1.25), AZUSA HVPS
(PL9.1.6), LVPS 230 (PL9.1.5)
2 Is no printing performed?
Is the device reset during printing?
3
- PWBA MCU XFABK(B) replacement check -
4 Does this error recur after the defective PWBA MCU
XFABK(B) is replaced with a normal one?
- Interface Cable check -
5 Does this error recur after the defective Interface Cable
is replace with a normal one?
2-26
Check
Action
YES
Replace and
reattach the parts.
To step 4
Go to FIP-2.9,
Noise
To step 5 Action completed
Host side check Action completed
NO
To step 2
To step 3
To step 4