REP3.5 PAD ASSY RETARD TRAY (PL3.1.23)
<Removal>
1)
Remove the CASSETTE ASSY 250 CL from the printer.
2)
Release the hook using the small screwdriver through the left and right holes of FRAME BASE
RTD TRAY HN (PL3.1.22), remove the FRAME BASE RTD TRAY HN.
3)
Remove the PAD ASSY RETARD TRAY and SPRING RETARD TRAY (PL3.1.24) from the
FRAME BASE RTD TRAY HN.
NOTE
<Replacement>
Perform the removal procedures in the reverse order.
Chapter 4 Disassembly/Assembly and Adjustment
When removing the PAD ASSY RETARD TRAY, be careful not to touch the rubber
part.
2)
SPRING RETARD TRAY
Hook
TRAY ASSY FRONT
FRAME BASE RTD TRAY HN
4.2 Disassembly/Assembly
PAD ASSY RETARD TRAY
3)
AZS489CA
4-23