Fip-2.7 Gear Assy Error - Fuji Xerox DocuPrint 2050 Service Manual

FIP-2.7 GEAR ASSY error

Procedure
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
1 transformation, dirt, or foreign object?
- Major check parts -
GEAR ASSY (PL7.1.1), HARNESS ASSY MOTOR
MAIN (PL7.1.4), PWBA MCU XFABK(B) (PL9.1.25)
- GEAR ASSY/MOTOR ASSY MAIN power check -
Is 5VDC applied to the J1090-3PIN<=>J1090-4PIN?
2
Disconnect the Drum/toner cartridge and turn on the
INTERLOCK SWITCH for check.
- HARNESS ASSY MOTOR MAIN check -
3 Is the J109<=>J1090 connected normally?
- PWBA MCU XFABK(B) replacement check -
4 Does this error recur after the defective PWBA MCU
XFABK(B) is replaced with a normal one?
Check
Chapter 2 Troubleshooting
2.3 Level 2 FIP
Action
YES
Replace and
reattach the parts.
Replace the
To step 3 PWBA MCU
XFABK(B)
Replace the
To step 4 HARNESS ASSY
MOTOR MAIN
Replace the
Action completed
GEAR ASSY
NO
To step 2
2-33