Chapter 3 Image Quality Troubleshooting
3.5 Image Quality FIP
FIP-P15 "Unfused toner"
Paper is waved and wrinkled.
- Initial check -
P15
Are there errors such as use of parts in different
specifications, attachment error, damage,
transformation, dirt or foreign object?
- Major check parts -
CASSETTE ASSY 250 CL (PL2.1.1)
Item
1
Is the ream of papers in the specified range?
Is the heater of the FUSER ASSY CL CH turned on?
2
Does this error occur after the AZUSA HVPS is
3
replaced?
Does this error occur after the FUSER ASSY CL CH is
4
replaced?
3-28
Phenomenon/Initial check
Check
Print sample
Action
(at occurrence of error)
Set papers in the specified range.
When the heater is turned on,
replace the FUSER ASSY CL
CH; otherwise, check whether the
heater of the FUSER ASSY CL
CH is conductive.If it is
conductive, replace the AZUSA
HVPS. If it is not conductive,
replace the FUSER ASSY CL
CH.
Replace the FUSER ASSY CL
CH.
Replace the PWBA MCU.