How To Use Pc Diag; Outline Of Operation; Diagnostic Tool Components - Fuji Xerox DocuPrint 2050 Service Manual

2.4 How to use PC Diag.

NOTE
NOTE

2.4.1 Outline of Operation

2.4.1.1 Diagnostic Tool Components

- CD-ROM for activating Diagnostic And Adjustment Software
- DIAG I/F BOARD
- Centronics parallel printer cable
Use Environment
DOS/V PC equipped with the CD-ROM Driver and printer port
(Supported OS: Windows98, 2000, and XP, Not supported for NEC PC-9800 series.)
This manual describes the Fuji Xerox Printing Systems standard specifications.
When the printer controller directly controls the indicators (two LED lamps) or the
OEM destination provides the unique specifications, refer to the relevant OEM
specifications.
This manual describes the operation, indication, and operations at use of the dialog
commander* (maintenance tool).
* If the system has a controller or diagnostic function in a PC, use it preferentially.
Chapter 2 Troubleshooting
2.4 How to use PC Diag.
2-37