Controller Specifications; External Interface; Decomposer; Job Control Function - Fuji Xerox DocuPrint 2050 Service Manual

6.1.12 Controller Specifications

6.1.12.1 External Interface

1) USB
Item
Connector
Protocol
Support Client
*1 : Supports after Windows98SE
2) IEEE1284
Item
Connector
Protocol
Support Client

6.1.12.2 Decomposer

Sizes that can be used
Non-printable conditions
Printable Area
Image Quality Guaranteed
Area

6.1.12.3 Job Control Function

1) Canceling Printing
A job in progress can be canceled (aborted) from the Control Panel.
2) Job Recovery
When a paper jam causes a job to fail, the job will resume automatically when the jammed paper
is removed and re-start.
3) Job Timeout
When a pause occurs for a period of time (can be changed or indefinite) during a job transfer, the
data transferred halfway will be aborted as an error.
Specifications
Type B x1
Compliance with USB 2.0. High Speed capable
*1
Windows98 /Me/2000/XP/2003 Server, USB standard device
Centronics 36pin x1
Standard/nibble/ECP
Windows98/Me/NT4.0/2000/XP/2003 Server, standard device
Maximum Size: 297mm x 420mm
Not printable within 5mm from all 4 edges
For DL: Not printable within 6.1mm from left/right edges and
4mm from top/bottom edges
Maximum Size: 287mm x 410mm
Same as Printable Area
Chapter 6 General
Specifications
6.1 Specifications
6-13