Chapter 2 Troubleshooting
2.3 Level 2 FIP
FIP-2.8 AZUSA HVPS error
Procedure
- Initial check -
Are there errors such as use of parts in different
specifications, attachment error, damage,
1
transformation, dirt, or foreign object?
- Major check parts -
AZUSA HVPS (PL9.1.6), CABLE HV (PL9.1.8), PWBA
MCU XFABK(B) (PL9.1.25)
- CABLE HV check -
2
Is the CN201<=>J201 connected normally?
- PWBA MCU XFABK(B) replacement check -
3
Does this error recur after the defective PWBA MCU
XFABK(B) is replaced with a normal one?
2-34
Check
Action
YES
Replace and
reattach the parts.
Replace the
To step 3
CABLE HV
Replace the
Action completed
AZUSA HVPS
NO
To step 2