Rep8.3 Roll Assy Btr (Pl8.1.13) - Fuji Xerox DocuPrint 2050 Service Manual

Chapter 4 Disassembly/Assembly and Adjustment
4.2 Disassembly/Assembly

REP8.3 ROLL ASSY BTR (PL8.1.13)

<Removal>
1) Pull the LEVER FRONT R and LEVER FRONT L toward you and open the COVER ASSY FRONT.
NOTE
NOTE
2) Unlock and remove the right and left CAP BTR BEARINGs.
3) Remove the ROLL ASSY BTR upward.
<Replacement>
Perform the removal procedures in the reverse order.
NOTE
NOTE
4-58
In the following procedure, the removal may be started from right or left.
There are the hook of CAP BTR BEARING (PL8.1.19) in the outside of left and
right.
Be careful to the direction when attaching the CAP BTR BEARING.
After attaching, confirm that the ROLL ASSY BTR is slid up and down correctly.