When A Message Is Displayed - Ricoh C280 Manual

7. Troubleshooting
When the supply/exchange indicators light up
Indicator
"Add paper."
"Add Ink"
"Add Master"
"Master Eject Box is full."

When a Message is Displayed

Message
"Cannot detect original size."
"Check the paper size and
paper direction."
"#### and paper size
mismatch."
176
Message
Causes
Original size is not detected
correctly.
The paper is not placed in the
same direction as the original.
• The paper you loaded
does not match with the
reproduction ratio you
selected.
• The reproduction ratio
selected by Auto
Magnification mode is too
big or too small.
Reference
See page 167 "Adding Paper".
See page 171 "Adding Ink".
See page 173 "Replacing the Master Roll".
See page 186 "When the Master Eject
Indicator Is Lit".
When placing an original
directly on the exposure glass,
the lifting/lowering action of the
exposure glass cover or ADF
triggers the automatic original
size detection process. Lift the
exposure glass cover or ADF by
30 degrees or more.
• Place the original in the
same direction as the
paper.
• If you press the [Start] key,
the selected paper will be
used for printing.
Set a paper size that matches
the reproduction ratio you have
selected and your original.
You can make prints if you press
the [Start] key.
Solutions