Adapter Cable For Piko Button; Additional Options; Control Panel Holder - Otto Bock C2000 Instructions For Use Manual

Use

8.15.5 Adapter cable for Piko button

INFORMATION
For additional information on the user-specific adjustment of this function: see inside front cover.
The power wheelchair may be equipped with an optional adapter cable and Piko buttons.
• The adapter cable makes it possible to connect Piko buttons for control functions.
• The connected Piko button can be used to control power seat functions as well as other functions (see below).
These functions are specified when the power wheelchair is ordered.
• Each Piko button switch is programmed with a so-called toggle function. The selected function is activated as
long as the button is pressed. The selected function is activated in the opposite direction if the button is
released and pushed again.
• For example, if the power back angle adjustment is activated, the backrest tilts back as long as the button is
pressed the first time around. Activating this function again causes the backrest to tilt forward as long as the
button is pressed.
Available functions

8.16 Additional options

8.16.1 Control panel holder

Swing-away control panel holder
The control panel holder makes it possible to drive the power wheelchair under a table or closer to an object.
The control panel holder can be rotated up to the armrest. In addition, the control panel can be removed upwards
from the control panel holder.
42
Height-adjustable control panel holder
The height-adjustable control panel holder allows for height adjustment of the control panel.
43
54 | Ottobock
Swinging away the control panel holder
1) Apply slight pressure to push the control panel
holder to the side.
→ The pivot element is unlocked.
2) Swing the control panel holder away to the side.
INFORMATION: The pivot element locks in
place again when the holder is rotated back to
the original position.
Adjusting the height
1) Loosen the mounting screws.
2) Adjust the height of the control panel holder.
3) Tighten the mounting screws.
C2000