INFORMATION
When getting into or out of the power wheelchair, bring
the seat to a level position.
7.1.2 Electric Seat Height Adjustment
WARNING
Risk of falling due to improper use of the seat height
adjustment feature.
Drive in street traffic only with the seat height adjust-
ment lowered.
Use the seat height adjustment feature only with the
backrest in the upright position.
When driving with the seat height adjustment feature
raised, fasten the belts (lap belt, four-point belt) and
do not lean out beyond the seat surface.
Ensure that creep speed is activated when the seat
height adjustment function is used. If this is not the
case, contact a specialist dealer immediately. Only
use the power wheelchair with the seat height adjust-
ment in its lowest position until the fault is repaired.
C1000 DS
NOTICE
Damage due to lack of maintenance of the seat height
adjustment feature.
Inspect the seat height adjustment feature for visible
signs of damage at least 1 x per month and ensure all
screw connections are tight.
Check for correct tyre pressure.
NOTICE
Risk of transportation damage. Always lower the seat
height adjustment feature fully for loading or transporta-
tion.
INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions for Use".
The power wheelchair can be equipped with an optional
electric seat height adjustment feature. The seat height ad-
justment feature raises the seat using a motor drive.
The electric seat height adjustment feature is available in
different versions:
Electric seat height adjustment up to 400 mm
Electric seat height adjustment up to 300 mm
Accessories
Ottobock
191
|