Rear Lights; Figure 57 Replacing The Front Direction Indicator Bulb - Otto Bock C1000 DS Instructions For Use Manual

Maintenance, cleaning and disinfection
3. Remove the cover.
4. Slightly rotate the defective lamp to release it from the
lock on the lamp socket, and pull it out.
5. Hold the new bulb with a cloth, insert and lock it in
place (see Fig. 57).
6. Set the cover in place, hook it on, and press it down
tightly.
Figure 57 Replacing the front direction indicator bulb
Replacing the LED front light
The LED front light (see Fig. 57, item 2) is maintenance-free.
If repairs are required the qualified personnel who fitted the
wheelchair can help.
228 Ottobock
|

9.4.3 Rear lights

INFORMATION
The rear lights can be ordered from the specialist dealer.
INFORMATION
Only the complete rear light can be replaced on each side.
Two LED rear lights with integrated LED direction indicator
lights are installed in the steering motor mouldings at the
rear of the power wheelchair.
To replace the rear lights, proceed as follows:
1. Loosen and remove the Allen head screw using an Al-
len wrench size 4.
C1000 DS