Special Controls; Control Panel Holder; Swing-Away Control Panel Holder With Removable Control Panel - Otto Bock Skippi Plus Instructions For Use Manual

7.3.5 Special controls

The power wheelchair can be equipped with special con-
trols with various input modules, e.g. with:
„ Mini/Midi joystick control
„ Chin control
„ Piko buttons
INFORMATION
Detailed information on the respective controls can be
found in the respective included instructions for use "Spe-
cial controls" (serial number: 647G636).
Note that the Skippi Plus cannot be equipped with a foot
control.
7.4

Control panel holder

7.4.1 Swing-away control panel holder with removable
control panel
The removable control panel can be pulled up and removed
from the control panel holder.
To allow the user to drive the power wheelchair closer to an
object or under the edge of a table, the control panel can be
folded aside with a special control panel holder:
Skippi Plus
1. Apply slight sideways pressure to the control panel hold-
er to release the pivot element.
2. Fold the control panel holder aside.
3. The pivot element locks in place again when the holder is
rotated back to the original position.
Fig. 46 Control panel holder, swing-away
Accessories
Ottobock | 81