Figure 19 Control Panel Connections On The Underside - Otto Bock C1000 DS Instructions For Use Manual

2
Figure 19 Control panel connections on the underside
1 External On/Off button connector
2 Connector for external mode button
3 Programming receptacle
On/Off button
The On/Off button is used to turn the power wheelchair on
and off.
Mode button
Briefly pressing the mode button increases the speed level.
After reaching the maximum speed level, you can change
back to speed level 1 by pressing the button again (1-2-3-4-5-
C1000 DS
1-...). Pushing and holding the button for at least 2 seconds
switches the control unit to the "Electric seat function" menu.
Horn
The horn will sound as long as the horn button is being
3
pressed.
1
Warning flasher
Pressing the warning flasher button activates or deactivates
all four direction indicator lights.
Light
The front and rear lights are activated and deactivated by
pressing the light button.
Direction indicator lights
The right or left front and rear direction indicator lights are
activated and deactivated by pressing the "direction indica-
tor light, right" or "direction indicator light, left" buttons re-
spectively. The direction indicator lights automatically turn
off after 20 seconds.
LCD monitor
The LCD monitor is the communication interface between the
user and the control unit. It indicates the selected speed level,
Operation
Ottobock 167
|