Table of Contents
Advertisement
Professional
installation or service
requirement
Grounding
requirement
4
DW6000 installation and components
Professional installation and service of the two-way antenna assembly is
required by the Federal Communications Commission because the antenna
transmits radio frequency (RF) energy.
The two-way antenna assembly must be installed in a location or manner not
readily accessible to children.
The two-way antenna assembly must be installed at least 5 feet (1.5 meters)
above ground level or any nearby surface on which a person could sit or stand.
• The two-way antenna assembly emits radio frequency
energy when in the transmit mode.
• Unplug indoor power connection before performing
maintenance or adding upgrades to any antenna
components.
• To avoid risk of injury, do not place head or other body
parts between feed horn and reflector when system is
operational.
The RG6 coaxial cable must be connected to a ground block.
The ground block should be located at the point the coaxial
cable enters the building. The ground wire must be
connected to the ground block and routed to the earth
ground.
CAUTION
WARNING
Advertisement
Table of Contents
