Turn/Lights/Horn Switch (Int'l/Tractor) - Polaris RZR 900 2017 Service Manual

Testing
1. Disconnect the harness from the hazard switch.
2. Test outputs in both the ON and OFF positions. If any
of the tests fail, replace the switch.
• Move switch to ON. There should be continuity
between switch pins 2 and 3.
• Move the switch to OFF. There should be no continuity
between any switch pins.
TURN/LIGHTS/HORN SWITCH (INT'L/
TRACTOR)
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
Testing
1. Disconnect the Turn/Lights/Horn switch by
depressing the connector locks and pulling on the
connector. Do NOT pull on the wiring.
2. Test between the sets of outputs. If any of the tests
fail, replace the switch assembly.
• Turn on the High Beam. There should be continuity
between switch pins 2 and 5.
• Turn on the Low Beam. There should be continuity
between switch pins 2 and 6.
• Turn on the Left Turn Signal. There should be
continuity between switch pins 1 and 8.
• Turn on the Right Turn Signal. There should be
continuity between switch pins 1 and 7.
• Depress the Horn. There should be continuity between
switch pins 3 and 4.
ELECTRICAL
12
12.17